If you wish to get a bidet installed in Bancroft we can help. Our friendly setup contractors can look after all your demands.

Bidet Installation Bay Area

Specialist Solution
Rapid Reaction Time in Contra Costa County, California
Bidet Installment
For Every Kinds of Bidets, Japanese Toilets, Washlets, Shower Toilets and Smart Toilets
Lots Of Choices to Choose From
Residential and Commercial Solution

Please call (415) 818-1877 or complete our straightforward contact form and inform us about your bidet setup demands. We will reply you as soon as possible.

What are the benefits of using a Bidet?

Bidets have been used in Europe for decades and have started to expand in appeal in the United States. While including a free standing bidet to your house calls for committed pipes lines, bidet toilet seats and handheld bidet sprayers are easy to install and need really little space in your bathroom.

With a bidet, you do not need bathroom tissue after making use of the toilet given that the bidet does the cleansing for you. For some people, this hassle-free and eco-friendly addition to the bathroom is a favorable experience.

Bidets are available in many designs and two configurations, oblong and extended. A number of the bidet seats on the marketplace today use electricity to supply high-end, high-end features. There are some fundamental requirements and referrals to follow when setting up an electric bidet toilet seat, as it associates with the outlet (see our electrical referrals page). If your outlet does not satisfy these referrals, you will need to get an electrical contractor out to make the needed changes.

They may need pipes changes to your bathroom, which results in varying costs. This has a typical range of $500 to $1,500 for including a ceramic floor-mounted bidet to a restroom, with lots of people paying around $1,000 total.

This job’s low cost is around $400 for a standard bidet installed in a restroom with existing pipes. The high cost is around $2,500 for a wall-mounted bidet in a restroom that requires considerable pipes and coating work.

Plumbing Demands of a Bidet

Due to the fact that bidets have mixing shutoffs comparable to taps that permit you to readjust the rinse water to a comfy temperature level, an additional requirement is both a warm and cold-water supply. Furthermore, the pipes code requires what’s called a “vacuum breaker” to be used with bidet materials.

Vacuum breakers protect against water from being siphoned back into the supply system and creating contamination. Most bidets have an integral vacuum breaker, but it’s clever to confirm this before you acquire your bidet. If one is doing not have, as opposed to common shut offs at the wall surface, you can acquire ones that have a vacuum cleaner breaker.

One more distinction in between setting up a bidet and setting up a w.c. is the size and setup of the waste line. Toilets have internal traps to stop drain gases from getting away into busy spaces. Bidets do not, and a trap has to be installed in the rough pipes below| the flooring. Additionally, due to the fact that bidets are utilized for washing just and not for strong waste, their drains pipes are usually just 1 1/2 inch in diameter, contrasted to the 3-inch drain pipes most w.c.s use. As a matter of fact, the drain assembly for a bidet is much more like that for a shower or bath tub than a w.c..

Setting up Wall- and Floor-Mounted Bidets

Wall-mounted bidets need an unique frame to be installed in the wall surface prior to drywall and tile. Mounting bolts connected to this frame protrude from the wall surface, and all the pipes links are made at the wall surface. A special drain link is used that seals when the drain from the bidet is pushed in. The drain of a floor-mounted bidet is constantly in the flooring, but the materials might appear of the flooring or the wall surface. In every instance, it is very important to assess the pipes layout in the bidet’s setup instructions and make sure the rough pipes is exactly where it’s expected to be.

With the flooring and wall finishes finished and the stop shutoffs installed on the rough pipes materials, you can begin to actually install the bidet now. The place of a wall-mounted unit is determined by the formerly installed bolts.

Floor-mounted systems are fastened making use of wall mount bolts, which have a lag thread on one end and a machine thread on the various other. Locate and predrill the holes for these bolts making use of a design template (if one is provided) or by placing the bidet so its drain hole aligns with the trap and waste pipe in the flooring.

Since setup treatments vary for various bidets, ensure to check out the producer’s instructions before you begin. For the most part, it’s much easier to set out and install supply lines before placing the bidet to wall surface or flooring.

Wall-mounted bides are trickier to install after that floor-mounted models. Some wall-mounted systems have unique equipment that strings onto the bolts before the bidet is installed, while others just use nuts and washing machines. In either instance, you’ll be supporting the bidet from above while protecting the placing bolts by feeling from below. As you’re placing the bidet on the bolts, the drain has to be lined up keeping that in the rough pipes, and whatever is pressed house at once. A helper can make a difference here.

Floor-mounted bidets are put over the bolts you have actually threaded into the flooring and held back with nuts and washing machines, just like a w.c.. The drain assembly is placed into the hole in the bidet from above, and the drain links are tightened by way of an access hole in the back of the bidet.

The final actions are affixing the flexible materials to the shutoffs. Look for leaks, repair any type of you may locate, and afterwards caulk the bidet to the wall surface or flooring with a cool grain of silicone sealer.

The Bidet Seat Alternative

If you do not have room for a dedicated unit, a bidet-seat for your toilet is an alternative. There are two usual grabs. First, bidets use even more water than w.c.s do, so common 3/8-inch toilet shutoffs need to be replaced with 1/2-inch ones. This may need knowing just how to solder pipeline. Second, due to the fact that there will not be a hot water supply at the toilet, bidet-seats have important electric heating systems. There requires to be a GFCI-protected outlet close by.

If you have those things, after that the setup is a matter of eliminating the existing toilet seat and setting up the base for the bidet-seat in its area. Water is linked to the base from the shut-off via a versatile supply, and the heating system is plugged in.

Then, the bidet seat is installed to its base according to that producer’s instructions.

Bidet Installment Costs in Bancroft

National average cost $1,000.
Average range $500-$1,500.
Minimum cost $400.
Maximum cost $2,500.

Bidet Installment Expense by Project Range

Bidet Installation Prices

Minimum $400
A basic bidet in a restroom already plumbed, installed.

Average Expense $1,000
A floor-mounted bidet with the necessary pipes expansion, installed.

Maximum cost $2,500
A wall-mounted bidet with a considerable pipes expansion and coating work, installed.

What is a Bidet, Japanese Toilet, Washlet, Shower Toilet or Smart Toilet?

At its easiest, a bidet is a bowl-shaped seat with taps to wash after making use of the toilet. A bidet can get you cleaner than bathroom tissue and is much more environmentally friendly than various other methods. Bidets can be installed on your flooring or wall surface, and some w.c.s have built-in bidets or toilet seats with bidet features. A traditional bidet is made from ceramic and made to be straddled, with the user dealing with the back of the fixture.

Floor-Mounted Bidets in Contra Costa County, California

Floor-mounted bidets are the most usual design. Like floor-mounted w.c.s, they typically get water from the wall surface and drain with the flooring. The flooring holds the weight with a floor-mounted bidet, so beyond the water connect and the drain, the setup is straightforward. When the pipes is done, the bidet is embeded in area and bolted to the flooring. This additionally makes replacements easy due to the fact that the old bidet can be taken off and a new one put down in minutes if the pipes is in good condition. These models cost in between $200 and $600 on average.

Wall-Mounted Bidets in Contra Costa County, California

Wall-mounted bidets are wonderful for contemporary bathrooms. They do not interrupt the flooring’s visual, so it can make a little bathroom look larger. Also some customers find it easier to clean.

Like wall-mounted w.c.s, a wall-mounted bidet takes much more effort to install. This is due to the fact that the wall surface requires to be opened and a provider installed in the wall surface in between the studs. This holds the weight of the bidet and the user.

The wall surface has to be refinished after the bidet is installed. The average price for a wall-mounted bidet is in between $300 and $700 on average.

Bidet Installment Expense in 94598 Bancroft, California

Assuming that your layout can conveniently fit a bidet, the setup process primarily includes the fixture’s pipes. You need a water line brought to where the bidet is, and the bidet’s drain need to be linked to the pipes system. This may imply opening the wall surface, flooring, or both in close proximity to where the bidet will be installed. When opening the flooring, the bidet typically covers the opening, but the wall surface may need to be covered or painted.

Relying on just how much the pipes need to be run and just how tough the wall surface and flooring materials are to cut through, the whole process takes around 2 to 3 hrs on average.

Bidets are installed by plumbings billing in between $45 and $200 an hour for many jobs. Due to the fact that they need to run pipes to the bidet, the task can be straightforward or tough, relying on just how much the pipes need to run. If you need to reroute various other fixtures to fit the bidet or the pipes is old and requires upgrading, this can increase your costs substantially. For an average bidet setup of 2 to 3 hrs, the labor costs range from $250 to $600, with lots of people paying around $500 for setup out of the $1,000 total.

Bidet Water Closet Seat Installment Expense in 94598 Bancroft, California

Bidet toilet seats can be found in many designs. Some are meant to be installed conveniently Do It Yourself. In this instance, you need to loosen your toilet’s water supply, screw on the T couplet, and install the seat. If your bidet toilet seat requires a plumbing or electrician to install, anticipate costs in the series of $200 to $1,000. This range relies on your pipes and electricity’s layout and how much of the walls the plumbing professional or electrician requires to open up. Due to the fact that many bathrooms do not have an electrical outlet close to the toilet and most w.c.s are just plumbed for cold water, including these features increases setup costs. The seat installs conveniently in minutes, supplied the area is ready for the install.

Toilets with Integrated Bidets

A relatively brand-new fixture on the marketplace is a w.c. including an integrated bidet. Rather than a different toilet and bidet or a w.c. with a seat that functions as a bidet, these are w.c.s with additional features built-in.

Like the bidet toilet seats, you can locate a w.c. with an integrated bidet with many features. Some are fundamental, using simply the water spray, while others have incorporated MP3 players, heated seats, deodorizers, and much more. They are not as usual as the various other options and cost considerably much more, around $1,000 – $1,200, but they install like a common toilet and do not need as much space. They need a close-by outlet to function, nonetheless.

Pros and Cons of a Bidet

Many individuals enjoy making use of a bidet and the benefit it brings. There is no need for bathroom tissue with a bidet. So, you have lower month-to-month costs, do not need to bother with the eco-friendly effect of paper, and may have fewer toilet blockages. Bidets are considered much more hygienic by some and provide a personalized experience in the restroom.

Nevertheless, bidets take up a great deal of space. Every bidet calls for a minimum of 30 inches, with 36 inches being the suggested amount. It additionally requires to be installed near the toilet for best use, and the toilet additionally calls for 30 to 36 inches. For a little bathroom, including a bidet may need significant renovations. Even in larger bathrooms, it may imply transferring cabinetry or various other pipes to much better fit the bidet.

Bidet Repairs in 94598 Bancroft, California

Bidets are easy to clean and preserve. The ceramic is conveniently cleaned down with a towel and bathroom cleaner. Due to the fact that the bidet does not handle strong waste, it is easy to keep clean and much less most likely to tarnish.

Bidet toilet seats can additionally be cleaned down with a soft, moist towel as needed. Sometimes, a bidet seat or spray blockages from hard water. If this occurs, soak the nozzle in vinegar to dissolve the obstruction and flush with clean water.