If you want to obtain a bidet mounted in Ladera we can aid. Our skillful installation service providers can take care of all your requirements.

Bidet Installation Bay Area

Professional Solution
Fast Response Time in San Mateo County, California
Bidet Setup
For All Sorts of Bidets, Japanese Toilets, Washlets, Shower Toilets and Smart Toilets
Many Choices to Select From
Residential as well as Commercial Solution

Please call (415) 818-1877 or complete our simple contact form as well as inform us about your bidet installation requirements. We will certainly reply you right away.

What are the benefits of using a Bidet?

Bidets have actually been used in Europe for years as well as have actually started to expand in popularity in the U.S. While adding a free standing bidet to your house requires committed pipes lines, bidet water closet seats as well as handheld bidet sprayers are easy to mount as well as need very little space in your bathroom.

With a bidet, you do not require bathroom tissue after using the water closet because the bidet does the cleansing for you. For some people, this practical as well as environmentally friendly enhancement to the bathroom is a favorable experience.

Bidets can be found in many designs as well as two arrangements, oval as well as extended. Much of the bidet seats on the market today make use of electricity to supply high end, high end attributes. There are some fundamental requirements as well as suggestions to comply with when mounting an electrical bidet water closet seat, as it connects to the outlet (see our electric suggestions page). If your outlet does not fulfill these suggestions, you will certainly require to obtain an electrical expert out to make the needed modifications.

They might need pipes changes to your bathroom, which brings about differing expenses. This has a typical range of $500 to $1,500 for adding a ceramic floor-mounted bidet to a shower room, with the majority of people paying around $1,000 overall.

This job’s low cost is around $400 for a basic bidet mounted in a shower room with existing pipes. The high cost is around $2,500 for a wall-mounted bidet in a shower room that requires considerable pipes as well as surface job.

Plumbing Demands of a Bidet

Because bidets have mixing shutoffs comparable to faucets that allow you to change the rinse water to a comfy temperature level, an additional need is both a hot as well as cold-water supply. Additionally, the pipes code needs what’s called a “vacuum breaker” to be used with bidet supplies.

Vacuum breakers protect against water from being siphoned back into the supply system as well as triggering contamination. Many bidets have an integral vacuum breaker, however it’s clever to verify this prior to you acquire your bidet. If one is doing not have, instead of conventional shut down at the wall surface, you can acquire ones that have a vacuum cleaner breaker.

An additional difference between mounting a bidet as well as mounting a w.c. is the dimension as well as arrangement of the waste line. Toilets have internal traps to prevent drain gases from escaping into occupied spaces. Bidets don’t, as well as a trap should be mounted in the rough pipes below| the flooring. Also, since bidets are utilized for washing just as well as not for solid waste, their drains are commonly just 1 1/2 inch in size, compared to the 3-inch drainpipe pipelines most w.c.s make use of. In fact, the drainpipe setting up for a bidet is more like that for a shower or bathtub than a w.c..

Installing Wall- as well as Floor-Mounted Bidets

Wall-mounted bidets need an unique structure to be mounted in the wall surface prior to drywall as well as ceramic tile. Mounting screws connected to this structure protrude from the wall surface, and all the pipes links are made at the wall surface. A special drainpipe connection is used that seals when the drainpipe from the bidet is pushed in. The drainpipe of a floor-mounted bidet is constantly in the flooring, however the supplies might come out of the flooring or the wall surface. In every case, it‘s important to examine the pipes design in the bidet’s installation instructions as well as make sure the harsh pipes is specifically where it’s intended to be.

With the flooring as well as wall finishes completed as well as the quit shutoffs mounted on the rough pipes supplies, you can begin to really mount the bidet now. The area of a wall-mounted unit is identified by the previously mounted screws.

Floor-mounted devices are fastened using hanger screws, which have a lag string on one end as well as a device string on the other. Situate as well as predrill the holes for these screws using a design template (if one is supplied) or by placing the bidet so its drainpipe opening aligns with the catch as well as waste pipe in the flooring.

Considering that installation procedures vary for various bidets, ensure to read the producer’s instructions prior to you begin. For the most part, it’s simpler to outline as well as mount supply lines prior to placing the bidet to wall surface or flooring.

Wall-mounted bides are harder to mount after that floor-mounted models. Some wall-mounted devices have special equipment that strings onto the screws prior to the bidet is placed, while others simply make use of nuts as well as washers. In either case, you’ll be supporting the bidet from over while protecting the placing screws by feeling from listed below. As you’re putting the bidet on the screws, the drainpipe should be aligned with that in the rough pipes, as well as everything is pressed house at once. An assistant can make a distinction below.

Floor-mounted bidets are put over the screws you have actually threaded into the flooring as well as held back with nuts as well as washers, similar to a w.c.. The drainpipe setting up is placed into the hole in the bidet from above, as well as the drainpipe links are tightened using a gain access to opening in the rear of the bidet.

The final steps are connecting the versatile supplies to the shutoffs. Check for leaks, fix any you might locate, and then caulk the bidet to the wall surface or flooring with a cool grain of silicone sealant.

The Bidet Seat Choice

If you don’t have area for a dedicated unit, a bidet-seat for your water closet is an option. There are two common grabs. First, bidets make use of even more water than w.c.s do, so conventional 3/8-inch water closet shutoffs need to be replaced with 1/2-inch ones. This might need recognizing how to solder pipeline. Second, since there will not be a warm water supply at the water closet, bidet-seats have essential electric heaters. There requires to be a GFCI-protected outlet nearby.

If you have those points, after that the installation is a matter of removing the existing water closet seat as well as mounting the base for the bidet-seat in its place. Water is linked to the base from the shut-off through a flexible supply, as well as the heating system is plugged in.

After that, the bidet seat is placed to its base according to that producer’s instructions.

Bidet Setup Rates in Ladera

National average cost $1,000.
Average range $500-$1,500.
Minimum cost $400.
Highest cost $2,500.

Bidet Setup Expense by Job Range

Bidet Installation Costs

Low $400
A basic bidet in a shower room already plumbed, mounted.

Average Expense $1,000
A floor-mounted bidet with the needed pipes expansion, mounted.

Highest cost $2,500
A wall-mounted bidet with a comprehensive pipes expansion as well as surface job, mounted.

What is a Bidet, Japanese Toilet, Washlet, Shower Toilet or Smart Toilet?

At its most basic, a bidet is a bowl-shaped seat with faucets to clean after using the water closet. A bidet can obtain you cleaner than bathroom tissue as well as is more environmentally friendly than other techniques. Bidets can be placed on your flooring or wall surface, as well as some w.c.s have built-in bidets or water closet seats with bidet attributes. A conventional bidet is made from ceramic as well as designed to be straddled, with the individual facing the rear of the component.

Floor-Mounted Bidets in San Mateo County, California

Floor-mounted bidets are the most common design. Like floor-mounted w.c.s, they normally obtain water from the wall surface as well as drainpipe with the flooring. The flooring holds the weight with a floor-mounted bidet, so past the water attach as well as the drainpipe, the installation is simple. When the pipes is done, the bidet is set in place as well as bolted to the flooring. This likewise makes replacements easy since the old bidet can be taken off as well as a new one set down in minutes if the pipes remains in good condition. These models cost between $200 as well as $600 usually.

Wall-Mounted Bidets in San Mateo County, California

Wall-mounted bidets are excellent for contemporary shower rooms. They do not disturb the flooring’s aesthetic, so it can make a little bathroom appearance bigger. Also a few people find it easier to keep clean.

Like wall-mounted w.c.s, a wall-mounted bidet takes more effort to mount. This is since the wall surface requires to be opened as well as a carrier mounted in the wall surface between the studs. This holds the weight of the bidet as well as the person.

The wall surface should be redecorated after the bidet is mounted. The average price for a wall-mounted bidet is between $300 as well as $700 usually.

Bidet Setup Expense in 94028 Ladera, California

Assuming that your design can quickly suit a bidet, the installation procedure primarily involves the component’s pipes. You require a water line brought to where the bidet is, as well as the bidet’s drainpipe have to be linked to the pipes system. This might imply opening up the wall surface, flooring, or both close to where the bidet will certainly be mounted. When opening the flooring, the bidet normally covers the opening, however the wall surface might require to be covered or painted.

Depending on how much the pipelines have to be run as well as how hard the wall surface as well as flooring materials are to cut through, the whole procedure takes about 2 to 3 hrs usually.

Bidets are mounted by plumbers charging between $45 as well as $200 an hour for the majority of tasks. Because they require to run pipelines to the bidet, the task can be simple or hard, relying on how much the pipelines have to run. If you need to reroute other components to suit the bidet or the pipes is old as well as requires upgrading, this can elevate your expenses considerably. For a normal bidet installation of 2 to 3 hrs, the labor expenses range from $250 to $600, with the majority of people paying around $500 for installation out of the $1,000 overall.

Bidet W.c. Seat Setup Expense in 94028 Ladera, California

Bidet water closet seats come in many designs. Some are implied to be mounted quickly DIY. In this case, you require to unscrew your water closet’s water, screw on the T couplet, as well as mount the seat. If your bidet water closet seat requires a plumber or electrical contractor to mount, expect expenses in the series of $200 to $1,000. This array depends on your pipes as well as electricity’s design as well as just how much of the walls the plumbing or electrical contractor requires to open. Because the majority of shower rooms do not have an outlet beside the water closet as well as most w.c.s are just plumbed for cold water, adding these attributes increases installation expenses. The seat installs quickly in minutes, supplied the area awaits the mount.

W.C.s with Integrated Bidets

A fairly new component on the market is a w.c. including an incorporated bidet. Rather than a separate water closet as well as bidet or a w.c. with a seat that operates as a bidet, these are w.c.s with added attributes built-in.

Just like the bidet water closet seats, you can locate a w.c. with an incorporated bidet with many attributes. Some are fundamental, providing just the water spray, while others have actually integrated MP3 players, warmed seats, deodorizers, as well as more. They are not as common as the other choices as well as cost substantially more, around $1,000 – $1,200, however they mount like a typical water closet as well as do not require as much space. They need a neighboring outlet to work, nonetheless.

Pros and Cons of a Bidet

Lots of people enjoy using a bidet as well as the convenience it brings. There is no requirement for bathroom tissue with a bidet. So, you have lower month-to-month expenditures, do not require to worry about the environmental effect of paper, as well as might have fewer water closet obstructions. Bidets are taken into consideration more hygienic by some as well as offer a custom-made experience in the bathroom.

Nevertheless, bidets use up a lot of space. Every bidet requires a minimum of 30 inches, with 36 inches being the advised quantity. It likewise requires to be mounted near the water closet for ideal use, as well as the water closet likewise requires 30 to 36 inches. For a little bathroom, adding a bidet might need significant restorations. Even in bigger shower rooms, it might imply moving kitchen cabinetry or other pipes to better suit the bidet.

Bidet Maintenance in 94028 Ladera, California

Bidets are easy to tidy as well as repair. The ceramic is quickly wiped down with a towel as well as bathroom cleaner. Because the bidet does not deal with solid waste, it is easy to maintain tidy as well as much less likely to discolor.

Bidet water closet seats can likewise be wiped down with a soft, wet fabric as needed. Occasionally, a bidet seat or spray obstructions from tough water. If this happens, soak the nozzle in vinegar to liquify the obstruction as well as flush with tidy water.