If you would love to obtain a bidet installed in Redwood Junction we can assist. Our professional installation service providers can deal with all your demands.

Bidet Installation Bay Area

Professional Service
Rapid Action Time in San Mateo County, California
Bidet Setup
For Every Sorts of Bidets, Japanese Toilets, Washlets, Shower Toilets and Smart Toilets
Many Choices to Pick From
Residential and Commercial Service

Please call (415) 818-1877 or fill out our basic contact form and inform us regarding your bidet installation demands. We will get back to you right away.

What are the benefits of using a Bidet?

Bidets have actually been made use of in Europe for decades and have actually begun to grow in appeal in Redwood Junction. While adding a freestanding bidet to your house requires dedicated plumbing lines, bidet water closet seats and portable bidet sprayers are simple to install and require extremely little room in your shower room.

With a bidet, you do not require bathroom tissue after utilizing the water closet given that the bidet does the cleaning for you. For some individuals, this practical and environment-friendly addition to the shower room is a favorable experience.

Bidets come in many designs and two configurations, oblong and lengthened. Most of the bidet seats on the marketplace today use electrical power to offer luxury, luxury functions. There are some fundamental needs and referrals to comply with when mounting an electrical bidet water closet seat, as it connects to the outlet (see our electrical referrals page). If your outlet does not satisfy these referrals, you will require to obtain an electrical expert out to make the required adjustments.

They may require plumbing adjustments to your shower room, which leads to differing prices. This has an ordinary range of $500 to $1,500 for adding a ceramic floor-mounted bidet to a shower room, with many people paying around $1,000 overall.

This task’s low cost is around $400 for a basic bidet installed in a shower room with existing plumbing. The high cost is around $2,500 for a wall-mounted bidet in a shower room that requires substantial plumbing and finish job.

Plumbing Demands of a Bidet

Because bidets have blending shutoffs similar to faucets that enable you to adjust the rinse water to a comfortable temperature level, an additional requirement is both a warm and cold-water supply. In addition, the plumbing code needs what’s called a “vacuum breaker” to be made use of with bidet supplies.

Vacuum breakers prevent water from being siphoned back right into the supply system and creating contamination. Most bidets have an important vacuum breaker, however it’s smart to validate this prior to you acquire your bidet. If one is lacking, as opposed to typical shut offs at the wall surface, you can acquire ones that have a vacuum cleaner breaker.

An additional distinction between mounting a bidet and mounting a toilet is the dimension and configuration of the waste line. Water closets have internal traps to stop sewage system gases from leaving right into busy spaces. Bidets don’t, and a trap should be installed in the rough plumbing below| the flooring. Additionally, due to the fact that bidets are used for rinsing just and not for strong waste, their drains pipes are usually just 1 1/2 inch in size, compared to the 3-inch drainpipe pipes most toilets use. Actually, the drainpipe setting up for a bidet is extra like that for a shower or bathtub than a toilet.

Setting up Wall- and Floor-Mounted Bidets

Wall-mounted bidets require an unique frame to be installed in the wall surface before drywall and ceramic tile. Installing screws affixed to this frame protrude from the wall surface, and all the plumbing connections are made at the wall surface. An unique drainpipe connection is made use of that seals when the drainpipe from the bidet is pushed in. The drainpipe of a floor-mounted bidet is constantly in the flooring, however the supplies could appear of the flooring or the wall surface. In every situation, it‘s important to examine the plumbing design in the bidet’s installation instructions and make certain the harsh plumbing is exactly where it’s supposed to be.

With the flooring and wall coatings completed and the quit shutoffs installed on the rough plumbing supplies, you can begin to in fact install the bidet now. The area of a wall-mounted system is determined by the formerly installed screws.

Floor-mounted units are attached utilizing hanger screws, which have a lag thread on one end and a machine thread on the various other. Find and predrill the holes for these screws utilizing a design template (if one is supplied) or by placing the bidet so its drainpipe opening straightens with the trap and waste pipe in the flooring.

Given that installation procedures differ for different bidets, make certain to read the supplier’s instructions prior to you start. Most of the times, it’s less complicated to outline and install supply lines prior to mounting the bidet to wall surface or flooring.

Wall-mounted bides are trickier to install after that floor-mounted designs. Some wall-mounted units have special hardware that threads onto the screws prior to the bidet is installed, while others just use nuts and washers. In either situation, you’ll be supporting the bidet from over while safeguarding the mounting screws by feel from below. As you’re positioning the bidet on the screws, the drainpipe should be lined up with that said in the rough plumbing, and whatever is pressed house at the same time. A helper can make a difference below.

Floor-mounted bidets are positioned over the screws you‘ve threaded right into the flooring and held back with nuts and washers, much like a toilet. The drainpipe setting up is placed into the hole in the bidet from above, and the drainpipe connections are tightened up using an access opening in the back of the bidet.

The final actions are connecting the flexible supplies to the shutoffs. Check for leakages, fix any kind of you may discover, and then caulk the bidet to the wall surface or flooring with a cool grain of silicone sealer.

The Bidet Seat Option

If you don’t have area for a dedicated system, a bidet-seat for your water closet is an alternative. There are two usual grabs. First, bidets use more water than toilets do, so typical 3/8-inch water closet shutoffs need to be replaced with 1/2-inch ones. This may require recognizing just how to solder pipeline. Second, due to the fact that there will not be a warm water supply at the water closet, bidet-seats have integral electrical heating systems. There requires to be a GFCI-protected outlet close by.

If you have those things, after that the installation is a matter of eliminating the existing water closet seat and mounting the base for the bidet-seat in its location. Water is connected to the base from the shut-off by means of an adaptable supply, and the heating system is connected in.

Then, the bidet seat is installed to its base according to that supplier’s instructions.

Bidet Setup Rates in Redwood Junction

National typical cost $1,000.
Ordinary range $500-$1,500.
Minimum cost $400.
Highest cost $2,500.

Bidet Setup Cost by Task Range

Bidet Installation Costs

Minimum $400
A fundamental bidet in a shower room currently plumbed, installed.

Ordinary Cost $1,000
A floor-mounted bidet with the needed plumbing extension, installed.

Highest cost $2,500
A wall-mounted bidet with a substantial plumbing extension and finish job, installed.

What is a Bidet, Japanese Toilet, Washlet, Shower Toilet or Smart Toilet?

At its most basic, a bidet is a bowl-shaped seat with faucets to wash after utilizing the water closet. A bidet can obtain you cleaner than bathroom tissue and is extra eco-friendly than various other approaches. Bidets can be installed on your flooring or wall surface, and some toilets have built-in bidets or water closet seats with bidet functions. A typical bidet is made from ceramic and made to be straddled, with the customer encountering the back of the component.

Floor-Mounted Bidets in San Mateo County, California

Floor-mounted bidets are the most usual style. Like floor-mounted toilets, they normally obtain water from the wall surface and drainpipe with the flooring. The flooring holds the weight with a floor-mounted bidet, so past the water attach and the drainpipe, the installation is basic. When the plumbing is done, the bidet is set in location and bolted to the flooring. This likewise makes replacements simple due to the fact that the old bidet can be lifted off and a new one put down in mins if the plumbing remains in good condition. These designs cost between $200 and $600 typically.

Wall-Mounted Bidets in San Mateo County, California

Wall-mounted bidets are great for contemporary shower rooms. They do not interrupt the flooring’s visual, so it can make a tiny shower room look bigger. Also some customers find it easier to clean.

Like wall-mounted toilets, a wall-mounted bidet takes extra effort to install. This is due to the fact that the wall surface requires to be opened up and a carrier installed in the wall surface between the studs. This holds the weight of the bidet and the person.

The wall surface should be redecorated after the bidet is installed. The typical cost for a wall-mounted bidet is between $300 and $700 typically.

Bidet Setup Cost in 94063 Redwood Junction, California

Assuming that your design can conveniently fit a bidet, the installation process mostly includes the component’s plumbing. You require a water line installed where the bidet is, and the bidet’s drainpipe must be connected to the plumbing system. This may mean opening up the wall surface, flooring, or both close to where the bidet will be installed. When opening the flooring, the bidet normally covers the opening, however the wall surface may require to be patched or repainted.

Depending on just how far the pipes must be run and just how difficult the wall surface and flooring materials are to puncture, the whole process takes around 2 to 3 hours typically.

Bidets are installed by plumbing technicians billing between $45 and $200 an hour for most work. Because they require to run pipes to the bidet, the work can be basic or difficult, depending upon just how far the pipes must run. If you need to reroute various other components to fit the bidet or the plumbing is old and requires updating, this can increase your prices considerably. For a common bidet installation of 2 to 3 hours, the labor prices vary from $250 to $600, with many people paying around $500 for installation out of the $1,000 overall.

Bidet W.c. Seat Setup Cost in 94063 Redwood Junction, California

Bidet water closet seats come in many designs. Some are suggested to be installed conveniently Do It Yourself. In this situation, you require to unscrew your water closet’s supply of water, screw on the T couplet, and install the seat. If your bidet water closet seat requires a plumbing or electrical expert to install, anticipate prices in the variety of $200 to $1,000. This array relies on your plumbing and electrical power’s design and how much of the wall surfaces the plumbing or electrical expert requires to open. Because most shower rooms do not have an electrical outlet close to the water closet and most toilets are just plumbed for cold water, adding these functions increases installation prices. The seat sets up conveniently in mins, gave the location is ready for the install.

Water Closets with Integrated Bidets

A rather brand-new component on the marketplace is a toilet including an integrated bidet. As opposed to a different water closet and bidet or a toilet with a seat that functions as a bidet, these are toilets with added functions built-in.

Just like the bidet water closet seats, you can discover a toilet with an integrated bidet with many functions. Some are fundamental, offering just the water spray, while others have actually integrated MP3 players, warmed seats, deodorizers, and extra. They are not as usual as the various other alternatives and cost substantially extra, around $1,000 – $1,200, however they install like a standard water closet and do not require as much room. They require a close-by outlet to work, nonetheless.

Benefits and drawbacks of a Bidet

Many individuals delight in utilizing a bidet and the benefit it brings. There is no need for bathroom tissue with a bidet. So, you have lower month-to-month expenses, do not require to bother with the environmental impact of paper, and may have less water closet clogs. Bidets are taken into consideration extra hygienic by some and give a customized experience in the restroom.

Nevertheless, bidets take up a great deal of room. Every bidet requires a minimum of 30 inches, with 36 inches being the advised quantity. It likewise requires to be installed near the water closet for finest usage, and the water closet likewise requires 30 to 36 inches. For a tiny shower room, adding a bidet may require major restorations. Also in bigger shower rooms, it may mean transferring kitchen cabinetry or various other plumbing to much better fit the bidet.

Bidet Repairs in 94063 Redwood Junction, California

Bidets are simple to clean and repair. The ceramic is conveniently wiped down with a towel and shower room cleaner. Because the bidet does not handle strong waste, it is simple to keep clean and less likely to stain.

Bidet water closet seats can likewise be wiped down with a soft, damp cloth as required. Sometimes, a bidet seat or spray clogs from tough water. If this occurs, saturate the nozzle in vinegar to liquify the blockage and flush with clean water.