If you would love to get a bidet set up in San Francisco we can help. Our friendly installment service providers can take care of all your needs.

Bidet Installation Bay Area

Specialist Solution
Fast Response Time in San Francisco County, California
Bidet Installment
For Every Sorts of Bidets, Japanese Toilets, Washlets, Shower Toilets and Smart Toilets
Lots Of Alternatives to Choose From
Residential and Commercial Solution

Please call (415) 818-1877 or complete our easy contact form and tell us regarding your bidet installment needs. We will reply you today.

What are the benefits of using a Bidet?

Bidets have been utilized in Europe for decades and have started to grow in popularity in the United States. While including a freestanding bidet to your house calls for dedicated pipes lines, bidet water closet seats and portable bidet sprayers are very easy to mount and require very little space in your washroom.

With a bidet, you do not require bathroom tissue after utilizing the water closet because the bidet does the cleaning for you. For some individuals, this hassle-free and green addition to the washroom is a favorable experience.

Bidets can be found in numerous styles and 2 setups, oblong and elongated. A lot of the bidet seats on the market today make use of electricity to provide luxury, luxury features. There are some fundamental requirements and recommendations to adhere to when setting up an electric bidet water closet seat, as it associates with the electrical outlet (see our electrical recommendations page). If your electrical outlet does not satisfy these recommendations, you will require to get an electrical contractor out to make the needed modifications.

They may require pipes changes to your washroom, which leads to differing expenses. This has a typical range of $500 to $1,500 for including a ceramic floor-mounted bidet to a bathroom, with many people paying around $1,000 overall.

This project’s low cost is around $400 for a fundamental bidet set up in a bathroom with existing pipes. The high cost is around $2,500 for a wall-mounted bidet in a bathroom that needs substantial pipes and coating job.

Plumbing Demands of a Bidet

Since bidets have mixing valves comparable to faucets that allow you to adjust the rinse water to a comfy temperature level, an additional demand is both a hot and cold-water supply. Additionally, the pipes code requires what’s called a “vacuum breaker” to be utilized with bidet supplies.

Vacuum breakers stop water from being siphoned back right into the supply system and triggering contamination. Most bidets have an important vacuum breaker, however it’s wise to confirm this before you buy your bidet. If one is doing not have, as opposed to typical shut down at the wall, you can buy ones that have a vacuum breaker.

One more difference in between setting up a bidet and setting up a water closet is the dimension and configuration of the waste line. Water closets have inner traps to avoid sewage system gases from getting away right into busy rooms. Bidets do not, and a trap must be set up in the rough pipes below| the flooring. Also, due to the fact that bidets are utilized for washing just and except strong waste, their drains are commonly just 1 1/2 inch in diameter, contrasted to the 3-inch drain pipes most water closets make use of. Actually, the drain setting up for a bidet is much more like that for a shower or tub than a water closet.

Putting up Wall- and Floor-Mounted Bidets

Wall-mounted bidets require a special framework to be set up in the wall prior to drywall and floor tile. Installing screws attached to this framework protrude from the wall, and all the pipes links are made at the wall. A special drain link is utilized that seals when the drain from the bidet is pushed in. The drain of a floor-mounted bidet is always in the flooring, however the supplies may appear of the flooring or the wall. In every situation, it is essential to assess the pipes layout in the bidet’s installment directions and ensure the rough pipes is specifically where it’s intended to be.

With the flooring and wall finishes completed and the stop valves set up on the rough pipes supplies, you can begin to actually mount the bidet now. The location of a wall-mounted device is determined by the previously set up screws.

Floor-mounted systems are fastened utilizing hanger screws, which have a lag thread on one end and a machine thread on the various other. Locate and predrill the holes for these screws utilizing a template (if one is supplied) or by placing the bidet so its drain hole lines up with the trap and drain in the flooring.

Because installment treatments vary for various bidets, see to it to read the manufacturer’s directions before you begin. In many cases, it’s less complicated to outline and mount supply lines before mounting the bidet to wall or flooring.

Wall-mounted bides are harder to mount then floor-mounted versions. Some wall-mounted systems have unique hardware that threads onto the screws before the bidet is installed, while others merely make use of nuts and washing machines. In either situation, you’ll be sustaining the bidet from above while securing the mounting screws by feeling from below. As you’re positioning the bidet on the screws, the drain must be straightened with that in the rough pipes, and everything is pressed house simultaneously. An assistant can make a distinction below.

Floor-mounted bidets are positioned over the screws you‘ve threaded right into the flooring and held back with nuts and washing machines, much like a water closet. The drain setting up is placed into the hole in the bidet from above, and the drain links are tightened up by way of a gain access to hole in the rear of the bidet.

The last actions are connecting the versatile supplies to the shutoffs. Look for leaks, fix any you may find, and after that caulk the bidet to the wall or flooring with a neat bead of silicone sealer.

The Bidet Seat Choice

If you do not have room for a dedicated device, a bidet-seat for your water closet is an alternative. There are 2 typical snags. Initially, bidets make use of even more water than water closets do, so typical 3/8-inch water closet shutoffs have to be replaced with 1/2-inch ones. This may require knowing exactly how to solder pipe. Second, due to the fact that there will not be a warm water supply at the water closet, bidet-seats have indispensable electrical heating units. There needs to be a GFCI-protected electrical outlet close by.

If you have those things, then the installment is a matter of getting rid of the existing water closet seat and setting up the base for the bidet-seat in its location. Water is attached to the base from the shut-off via an adaptable supply, and the heating system is plugged in.

After that, the bidet seat is installed to its base according to that manufacturer’s directions.

Bidet Installment Costs in San Francisco

National typical cost $1,000.
Average range $500-$1,500.
Lowest cost $400.
Highest cost $2,500.

Bidet Installment Price by Project Range

Bidet Installation Costs

Low $400
A standard bidet in a bathroom already plumbed, set up.

Average Price $1,000
A floor-mounted bidet with the essential pipes extension, set up.

Highest cost $2,500
A wall-mounted bidet with a substantial pipes extension and coating job, set up.

What is a Bidet, Japanese Toilet, Washlet, Shower Toilet or Smart Toilet?

At its easiest, a bidet is a bowl-shaped seat with faucets to wash after utilizing the water closet. A bidet can get you cleaner than bathroom tissue and is much more environmentally friendly than various other methods. Bidets can be installed on your flooring or wall, and some water closets have integrated bidets or water closet seats with bidet features. A typical bidet is made from ceramic and made to be straddled, with the customer facing the rear of the component.

Floor-Mounted Bidets in San Francisco County, California

Floor-mounted bidets are one of the most typical design. Like floor-mounted water closets, they normally receive water from the wall and drain via the flooring. The flooring holds the weight with a floor-mounted bidet, so past the water hook up and the drain, the installment is easy. As soon as the pipes is done, the bidet is embeded in location and bolted to the flooring. This also makes substitutes very easy due to the fact that the old bidet can be taken off and a brand-new one set down in minutes if the pipes remains in good condition. These versions cost in between $200 and $600 typically.

Wall-Mounted Bidets in San Francisco County, California

Wall-mounted bidets are fantastic for modern washrooms. They do not disrupt the flooring’s visual, so it can make a little washroom appearance larger. Also a few people find it easier to clean.

Like wall-mounted water closets, a wall-mounted bidet takes much more work to mount. This is due to the fact that the wall needs to be opened up and a service provider set up in the wall in between the studs. This holds the weight of the bidet and the person.

The wall must be redecorated after the bidet is set up. The typical cost for a wall-mounted bidet is in between $300 and $700 typically.

Bidet Installment Price in 94199 San Francisco, California

Assuming that your layout can easily suit a bidet, the installment process primarily includes the component’s pipes. You require a water line brought to where the bidet is, and the bidet’s drain must be attached to the pipes system. This may suggest opening the wall, flooring, or both near where the bidet will be set up. When opening up the flooring, the bidet normally covers the opening, however the wall may require to be covered or painted.

Depending upon exactly how much the pipes must be run and exactly how challenging the wall and flooring materials are to puncture, the entire process takes around 2 to 3 hours typically.

Bidets are set up by plumbing professionals charging in between $45 and $200 a hr for many jobs. Since they require to run pipes to the bidet, the job can be easy or challenging, depending upon exactly how much the pipes must run. If you have to reroute various other fixtures to suit the bidet or the pipes is old and needs updating, this can elevate your expenses considerably. For an ordinary bidet installment of 2 to 3 hours, the labor expenses vary from $250 to $600, with many people paying around $500 for installment out of the $1,000 overall.

Bidet Toilet Seat Installment Price in 94199 San Francisco, California

Bidet water closet seats come in numerous styles. Some are indicated to be set up easily DIY. In this situation, you require to unscrew your water closet’s water system, screw on the T couplet, and mount the seat. If your bidet water closet seat needs a plumbing technician or electrical expert to mount, expect expenses in the variety of $200 to $1,000. This variety depends on your pipes and electricity’s layout and just how much of the wall surfaces the plumbing technician or electrical expert needs to open. Since many washrooms do not have an outlet beside the water closet and most water closets are just plumbed for cold water, including these features raises installment expenses. The seat installs easily in minutes, offered the area is ready for the mount.

Toilets with Integrated Bidets

A fairly new component on the market is a water closet featuring an integrated bidet. As opposed to a different water closet and bidet or a water closet with a seat that works as a bidet, these are water closets with additional features integrated.

Just like the bidet water closet seats, you can find a water closet with an integrated bidet with numerous features. Some are fundamental, offering just the water spray, while others have integrated MP3 players, warmed seats, deodorizers, and much more. They are not as typical as the various other options and cost substantially much more, around $1,000 – $1,200, however they mount like a standard water closet and do not require as much space. They require a close-by electrical outlet to work, however.

Pros and Cons of a Bidet

Many people take pleasure in utilizing a bidet and the comfort it brings. There is no requirement for bathroom tissue with a bidet. So, you have lower regular monthly costs, do not require to fret about the ecological influence of paper, and may have less water closet clogs. Bidets are considered much more sanitary by some and provide a customized experience in the washroom.

However, bidets occupy a lot of space. Every bidet calls for a minimum of 30 inches, with 36 inches being the recommended amount. It also needs to be set up near the water closet for best usage, and the water closet also calls for 30 to 36 inches. For a little washroom, including a bidet may require significant renovations. Even in larger washrooms, it may suggest moving cabinetry or various other pipes to better suit the bidet.

Bidet Maintenance in 94199 San Francisco, California

Bidets are very easy to clean and preserve. The ceramic is easily wiped down with a cloth and washroom cleaner. Since the bidet does not manage strong waste, it is very easy to maintain clean and much less likely to stain.

Bidet water closet seats can also be wiped down with a soft, wet fabric as needed. In some cases, a bidet seat or spray clogs from tough water. If this takes place, saturate the nozzle in vinegar to dissolve the obstruction and flush with clean water.