If you would like to obtain a bidet set up in University Heights we can help. Our friendly setup service providers can take care of all your demands.

Bidet Installation Bay Area

Specialist Solution
Quick Action Time in San Mateo County, California
Bidet Installation
For All Kinds of Bidets, Japanese Toilets, Washlets, Shower Toilets and Smart Toilets
Numerous Alternatives to Select From
Residential and also Commercial Solution

Please call (415) 818-1877 or fill in our basic contact form and also tell us about your bidet setup demands. We will reply you as soon as possible.

What are the benefits of using a Bidet?

Bidets have been utilized in Europe for years and also have started to grow in popularity in University Heights. While including a free standing bidet to your home needs dedicated pipes lines, bidet water closet seats and also handheld bidet sprayers are very easy to mount and also need extremely little room in your restroom.

With a bidet, you do not need bathroom tissue after making use of the water closet because the bidet does the cleansing for you. For some people, this convenient and also environment-friendly addition to the restroom is a favorable experience.

Bidets come in lots of designs and also two configurations, oval and also lengthened. Many of the bidet seats on the marketplace today use power to offer high-end, high-end functions. There are some fundamental demands and also suggestions to follow when setting up an electrical bidet water closet seat, as it connects to the electrical outlet (see our electric suggestions web page). If your electrical outlet does not satisfy these suggestions, you will need to obtain an electrician out to make the needed modifications.

They may need pipes modifications to your restroom, which causes varying costs. This has an average range of $500 to $1,500 for including a ceramic floor-mounted bidet to a shower room, with most people paying around $1,000 total amount.

This task’s low cost is around $400 for a standard bidet set up in a shower room with existing pipes. The high expense is around $2,500 for a wall-mounted bidet in a shower room that requires substantial pipes and also surface job.

Plumbing Needs of a Bidet

Since bidets have blending shutoffs comparable to faucets that permit you to change the rinse water to a comfortable temperature, another requirement is both a hot and also cold-water supply. Furthermore, the pipes code needs what’s called a “vacuum breaker” to be utilized with bidet products.

Vacuum breakers stop water from being siphoned back right into the supply system and also causing contamination. Most bidets have an indispensable vacuum breaker, however it’s smart to confirm this before you acquire your bidet. If one is doing not have, as opposed to conventional shut down at the wall surface, you can acquire ones that have a vacuum breaker.

One more distinction between setting up a bidet and also setting up a w.c. is the dimension and also configuration of the waste line. W.c.s have internal traps to prevent sewage system gases from leaving right into busy rooms. Bidets don’t, and also a trap should be set up in the rough pipes below| the floor. Also, due to the fact that bidets are used for washing just and also not for strong waste, their drains pipes are normally just 1 1/2 inch in size, contrasted to the 3-inch drainpipe pipelines most w.c.s use. Actually, the drainpipe setting up for a bidet is extra like that for a shower or bath tub than a w.c..

Installing Wall- and also Floor-Mounted Bidets

Wall-mounted bidets need an unique structure to be set up in the wall surface before drywall and also floor tile. Installing screws affixed to this structure protrude from the wall surface, and all the pipes connections are made at the wall surface. A special drainpipe link is utilized that seals when the drainpipe from the bidet is pushed in. The drainpipe of a floor-mounted bidet is constantly in the floor, however the products may come out of the floor or the wall surface. In every instance, it is essential to review the pipes layout in the bidet’s setup directions and also ensure the rough pipes is exactly where it’s meant to be.

With the floor and also wall coatings completed and also the quit shutoffs set up on the rough pipes products, you can begin to actually mount the bidet now. The place of a wall-mounted device is identified by the previously set up screws.

Floor-mounted devices are affixed making use of wall mount screws, which have a lag thread on one end and also a device thread on the other. Locate and also predrill the holes for these screws making use of a template (if one is supplied) or by placing the bidet so its drainpipe opening lines up with the trap and also waste pipe in the floor.

Because setup procedures differ for various bidets, make certain to check out the manufacturer’s directions before you start. Most of the times, it’s simpler to outline and also mount supply lines before mounting the bidet to wall surface or floor.

Wall-mounted bides are more difficult to mount then floor-mounted models. Some wall-mounted devices have special hardware that strings onto the screws before the bidet is installed, while others just use nuts and also washing machines. In either instance, you’ll be supporting the bidet from above while securing the mounting screws by feel from below. As you’re positioning the bidet on the screws, the drainpipe should be aligned with that said in the rough pipes, and also every little thing is pushed home simultaneously. A helper can make a difference below.

Floor-mounted bidets are positioned over the screws you have actually threaded right into the floor and also held down with nuts and also washing machines, similar to a w.c.. The drainpipe setting up is placed into the hole in the bidet from above, and also the drainpipe connections are tightened up using an access opening in the back of the bidet.

The last steps are affixing the versatile products to the shutoffs. Look for leaks, fix any kind of you may find, and afterwards caulk the bidet to the wall surface or floor with a cool grain of silicone sealant.

The Bidet Seat Option

If you don’t have room for a dedicated device, a bidet-seat for your water closet is an option. There are two usual grabs. First, bidets use even more water than w.c.s do, so conventional 3/8-inch water closet shutoffs have to be replaced with 1/2-inch ones. This may need knowing how to solder pipeline. Second, due to the fact that there will not be a warm water supply at the water closet, bidet-seats have integral electric heating systems. There requires to be a GFCI-protected electrical outlet close by.

If you have those points, then the setup is a matter of removing the existing water closet seat and also setting up the base for the bidet-seat in its place. Water is attached to the base from the shut-off through a flexible supply, and also the heating unit is connected in.

Then, the bidet seat is installed to its base according to that manufacturer’s directions.

Bidet Installation Rates in University Heights

National ordinary expense $1,000.
Average range $500-$1,500.
Minimum expense $400.
Maximum expense $2,500.

Bidet Installation Price by Task Range

Bidet Installation Prices

Low $400
A basic bidet in a shower room currently plumbed, set up.

Average Price $1,000
A floor-mounted bidet with the required pipes extension, set up.

Maximum expense $2,500
A wall-mounted bidet with an extensive pipes extension and also surface job, set up.

What is a Bidet, Japanese Toilet, Washlet, Shower Toilet or Smart Toilet?

At its easiest, a bidet is a bowl-shaped seat with faucets to wash after making use of the water closet. A bidet can obtain you cleaner than bathroom tissue and also is extra environmentally friendly than other approaches. Bidets can be installed on your floor or wall surface, and also some w.c.s have built-in bidets or water closet seats with bidet functions. A typical bidet is made from ceramic and also developed to be straddled, with the individual dealing with the back of the fixture.

Floor-Mounted Bidets in San Mateo County, California

Floor-mounted bidets are the most usual design. Like floor-mounted w.c.s, they generally obtain water from the wall surface and also drainpipe through the floor. The floor holds the weight with a floor-mounted bidet, so beyond the water attach and also the drainpipe, the setup is basic. Once the pipes is done, the bidet is set in place and also bolted to the floor. This also makes replacements very easy due to the fact that the old bidet can be taken off and also a brand-new one set down in minutes if the pipes remains in good condition. These models expense between $200 and also $600 generally.

Wall-Mounted Bidets in San Mateo County, California

Wall-mounted bidets are terrific for modern restrooms. They do not interrupt the floor’s aesthetic, so it can make a little restroom look bigger. Also a few customers find it more comfortable to keep clean.

Like wall-mounted w.c.s, a wall-mounted bidet takes extra effort to mount. This is due to the fact that the wall surface requires to be opened up and also a provider set up in the wall surface between the studs. This holds the weight of the bidet and also the user.

The wall surface should be redecorated after the bidet is set up. The ordinary rate for a wall-mounted bidet is between $300 and also $700 generally.

Bidet Installation Price in 94025 University Heights, California

Thinking that your layout can conveniently suit a bidet, the setup procedure primarily entails the fixture’s pipes. You need a water line brought to where the bidet is, and also the bidet’s drainpipe have to be attached to the pipes system. This may suggest opening up the wall surface, floor, or both in close proximity to where the bidet will be set up. When opening the floor, the bidet generally covers the opening, however the wall surface may need to be covered or painted.

Depending upon how much the pipelines have to be run and also how tough the wall surface and also floor materials are to puncture, the whole procedure takes about 2 to 3 hours generally.

Bidets are set up by plumbing technicians charging between $45 and also $200 a hr for the majority of jobs. Since they need to run pipelines to the bidet, the job can be basic or tough, relying on how much the pipelines have to run. If you have to reroute other fixtures to suit the bidet or the pipes is old and also requires updating, this can raise your costs substantially. For an average bidet setup of 2 to 3 hours, the labor costs vary from $250 to $600, with most people paying around $500 for setup out of the $1,000 total amount.

Bidet W.c. Seat Installation Price in 94025 University Heights, California

Bidet water closet seats come in lots of designs. Some are meant to be set up conveniently DIY. In this instance, you need to loosen your water closet’s supply of water, screw on the T couplet, and also mount the seat. If your bidet water closet seat requires a plumbing or electrician to mount, expect costs in the variety of $200 to $1,000. This variety depends on your pipes and also power’s layout and also how much of the walls the plumbing or electrician requires to open. Since the majority of restrooms do not have an outlet close to the water closet and also most w.c.s are just plumbed for cold water, including these functions increases setup costs. The seat installs conveniently in minutes, supplied the area is ready for the mount.

W.C.s with Integrated Bidets

A relatively brand-new fixture on the marketplace is a w.c. including an integrated bidet. Rather than a separate water closet and also bidet or a w.c. with a seat that works as a bidet, these are w.c.s with added functions built-in.

Like the bidet water closet seats, you can find a w.c. with an integrated bidet with lots of functions. Some are fundamental, offering just the water spray, while others have incorporated MP3 players, warmed seats, deodorizers, and also extra. They are not as usual as the other alternatives and also expense dramatically extra, around $1,000 – $1,200, however they mount like a common water closet and also do not need as much room. They need a close-by electrical outlet to operate, however.

Benefits and drawbacks of a Bidet

Lots of people delight in making use of a bidet and also the comfort it brings. There is no need for bathroom tissue with a bidet. So, you have lower monthly expenses, do not need to fret about the environmental effect of paper, and also may have less water closet clogs. Bidets are taken into consideration extra sanitary by some and also give a custom experience in the washroom.

Nonetheless, bidets take up a great deal of room. Every bidet needs a minimum of 30 inches, with 36 inches being the recommended quantity. It also requires to be set up near the water closet for finest use, and also the water closet also needs 30 to 36 inches. For a little restroom, including a bidet may need major restorations. Even in bigger restrooms, it may suggest relocating cabinets or other pipes to much better suit the bidet.

Bidet Upkeep in 94025 University Heights, California

Bidets are very easy to tidy and also maintain. The ceramic is conveniently cleaned down with a fabric and also restroom cleaner. Since the bidet does not manage strong waste, it is very easy to maintain tidy and also less most likely to tarnish.

Bidet water closet seats can also be cleaned down with a soft, damp towel as needed. Often, a bidet seat or spray clogs from hard water. If this takes place, soak the nozzle in vinegar to liquify the obstruction and also flush with tidy water.